START-GO

An easy way to remember the items to inspect is the phrase “START-GO.”

Steering, Skis, and Drive System

• For the steering system, verify that handlebars turn smoothly.
• Make sure skis are in good shape and free from ice.
• Check that the drive belt is in good shape and tight.

Throttle and Brake

• Press levers—they should move easily and snap back.
• Check that cables are in good shape with tight connections.

Activate Lights

• Turn on the lights.
• Press the brake, and have your riding partner make sure the brake light illuminates.
• Remove any ice, snow, and dirt from your lights, instruments, mirrors, and windshield.

Registration and Reflectors

• Make sure that your registration and trail permits/passes are attached and dates are current, as required by the state.
• Check that reflectors are attached and clean.

Track and Suspension

• Make sure that the track is in good shape. Studs and paddles should be tight.
• Be sure that the suspension is functioning well.

Gasoline and Ignition System

• Make sure the tank is full of fresh gas.
• Make sure the air filter is clean, undamaged, and unblocked.
• Replace spark plugs if necessary.

Oil

• Check oil while the engine is off.
• Check for oil or fuel leaks.